105
Set delay time which CPC turn off the computer. There are 18 options as OS delay
off setting: 0sec, 5sec, 10sec, 15sec, 20sec, 30sec, 45sec,
1min, 3min, 5min, 10min, 15min, 30min, 45min, 1hour, 2hour, 3hour,
∞
.
The default setting is 5 minutes.
Set delay time of cutting off the power output after computer is turned off.
There are 17 options as OS delay off setting: 0sec, 5sec, 10sec, 15sec, 20sec, 30sec, 45sec,
1min, 3min, 5min, 10min, 15min, 30min, 45min,
1hour, 2hour and 3hour. default setting is "5 sec"
Press this button will load default value of CPC basic setting section.
* In CPC basic setting section, the initial value is read from users.
Press this button to set when
fi
nish selecting what you want to set in CPC basic setting section.
Monitor the battery capacity when user boot the system.
Set the time interval of checking the battery capacity ( from 5 sec to 60 sec )
Note:
User "MUST" set this checking interval in advance. Otherwise,
it will pop up the error message while pressing the "Start" button in Main Page.
Press this button will read the current value set from user.
NOTE:
1. This delay time is only workable under "AUTO mode"
2. ""
∞
"" setting is only available after user starts the "Under voltage" function.
4. OS Delay Off
5. Main Power Delay
Load Default Button
Set Button
Start On Boot:
Recent Battery Value Check Frequency:
Read Register Button
Содержание 3I380A
Страница 8: ...3 2 1 3 1 2 3 Photo 1 Insert Unplug...
Страница 60: ...55 4 6 1 Boot Configuration Select Power on state for Numlock default is ON Numlock...
Страница 61: ...56 4 6 2 PCI Express Configuration PCIe 1 2 3 4 configuration settings...
Страница 63: ...58 4 6 2 2 PCIE Port 1 2 3 4 Speed The optional settings are Gen1 default Gen2 Select PCI Express port speed...
