Lewmar 125 VRTT, Руководство владельца по установке, эксплуатации и обслуживанию

Страница: 9 / 24

POWER THRUSTER AUX CONTROLLER
SPLITTER SPLITTER
BATTERY SWITCH
OR
AUTOMATIC BATTERY
12v 589810
BATTERY
CONTROL BOX
COVER
REMOVED
THERMAL
SWITCH
* Solenoid
r.
Connector
FUSE
ICU
Aux cable only required
if using the the
ABS and/or PS box
ON
Pontoon VRTT Thruster Manual ref 55110293 iss.4
|
9
6 - Fit ICU and wire to VRTT, power Supply:
Find a suitable location for the ICU. The ICU needs to be in a dry environment and away from the motor, due to
electrical noise. The ICU should be located in the vertical plane, as per the arrow on the lid, and within 5 meters
of the motor. It is recommended that the ICU not is attached directly to the motor.
The ICU requires its own battery supply, follow locate electrical law for the installation.
1. The ICU has a 5A circuit breaker.
2. ICU power cable should be rated for 5-amps minimum.
Connect the VRTTs flying lead into the THRUSTER port of the ICU.
Electrical motor installs
‣ The motor requires its own battery supply. B is marked on the motor. The motor should be wired to the
battery with a supply switch and circuit breaker.(Hold battery terminal when tightening nuts)