Lewmar 125 VRTT, Руководство владельца по установке, эксплуатации и обслуживанию

Страница: 7 / 24

Fig 4.1.1
Fig 4.1.2
Pontoon VRTT Thruster Manual ref 55110293 iss.4
|
7
4.1 Place upper VRTT
Assembly on to the lower flange.
1. Lower thruster through hole in mounting box. Ensure 2 orings are in place. Use grease to temporarily hold
orings in place while lowering thruster. Line bolt clearance holes.
2. Push on securing ring from underneath, ensuring that 3 orings are used and in place. Apply grease to Oring.
3. Secure retaining ring with 6 bolts from above thruster.
4. Replace tunnel assembly. Ensure oring is in place
5. Rotate prop if motor shaft doesnt line up with thruster hub
6. Secure tunnel assembly with 6 x norlock washers and m6 bolts.
4 - Fitting