LewanSoul LSC-24, Руководство пользователя

Страница: 5 / 19

5
2. Servo controller power supply
The VCC + support voltage ranges from 5V to 9V.
The power supply voltage depends on the voltage of the controlled servo. Both
must be consistent.
Tips: Be careful of the power short circuit in the process of power connection.
3. Low voltage alarm
If the power supply is below 5V, the servo controller will make sound of
beep(DIDI), please replace the battery or charge the battery in time.
Note: 1. Make sure that the jumper cap is properly inserted on the controller
2. If you directly charge the battery, please turn off the controller when
battery is charging.
4. Driver installation
When the servo controller is connected to the computer for the first time, the
computer will automatically install the driver.