Levtech Service
& Prodtuction SRL
The controller comes ready-to-use from the factory and provides safe control of the
given system immediately after connection. In addition, personalization is possible, which
can be carried out on the device through the Wifi connection of a smartphone or a laptop.
To access the settings, use your device to find the
Solar_control
WiFi availability and
connect to it.
Password of the wifi
:
password
After a successful connection, by scanning the QR code on the device, the main
page of Solar Control opens in our browser or we enter the following IP address in the
address bar of the browser (e.g.: Chrome/Google/Safari):
192.168.4.1
If the browser has successfully opened the main page, here we can see the main
data about the system, such as the current temperatures, the state of the pump, and from
here we can choose between the group of parameters to be modified. It is possible to
change the control (Setup) and network parameters (LAN Setup).
*
Also, here is the firmware version (lower right corner) and the icon for the manual
(upper right corner).
Attention!
Internet access is required when trying to access the manual.
Therefore, it is necessary to disconnect from the controller and provide Internet access.
Settings
* By default, the subtitles are displayed in English. The language can be changed by following the
steps described in the chapter Changing the language.
