SOS Item #5585
Lead Time 14 Days
9
LEVOLOR.com
LOCATING DIVIDER RAILS
Divider rails separate the top louvers from the bottom louvers. This allows the bottom half of shutters to be fully closed for
privacy, while allowing the upper half to be open.
A divider rail is required for any shutter panel over 66-inches in height. Two divider rails are required for shutters over
90-inches in height. There is no extra charge for divider rails.
Note: If there are two divider rails along with motorized tilt, the mid-section of louvers will operate simultaneously with ei-
ther the top section of louvers or the bottom section of louvers. Preferred configuration must be selected at time of order.
You can request the approximate height of the divider rail placement at time of order.
Simply provide the measurements from the bottom of shutter to the center of the divider rail location.
NOTE:
The divider rail location may vary up or down by 1
1
⁄
2
in. from the height requested.
Top
Operating
Louvers
Divider Rails
*Inside Mount
Distance-Up is
distance from top
of sill to center of
where you would
like divider rail.
*Outside Mount
Distance-Up is
distance from
bottom of shutter
frame to center of
where you would
like divider rail.
Bottom
Operating
Louvers
All divider rail heights are 2
5
⁄
8
"
regardless of louver size.
PANEL LOCK
Panel locks are located at the top and bottom of a shutter panel. They are used to keep
panels securely closed and can also be used to level the panel. Panel locks are standard
for 4-sided frames.
NOTE:
Motorized shutter panels with a divider
rail require 2 motors (top & bottom)
• Louver overlap may occur; there should be no less than 18" between the divider rail and top/bottom rail.
• You can request the approximate height of the divider rail placement
.
For example, it may be necessary to match
an existing window divider. Simply supply the measurements from the bottom of shutter to the center of the divider rail
location. For framed shutters measure from bottom of frame.
• It is important to note that the exact location may vary from the height you request
. Location of divider rails may
vary up or down by 1
1
⁄
2
inches.
