FIBER CONNECTOR SAFETY WARNINGS
SAFETY INFORMATION
•
Always wear safety glasses.
• Isopropyl alcohol is flammable and may cause eye irritation. In case of contact with eyes, flush with water for at
least 15 minutes. When using isopropyl alcohol, always assure proper levels of ventilation. In case of ingestion,
consult a physician immediately.
•
Never look directly into a laser light source, point source at a person’s eyes, or point
source at reflective
surfaces.
• When working on a fiber link, always turn laser source off, or disconnect completely.
• Always dispose of fiber debris properly, preferably using sticky tabs.
•
Do not place food or beverages in the vicinity of the work area.
• Thoroughly wash face and hands after terminating fiber.
• Carefully remove any fiber debris that may have been stuck to clothing, or left in work
area, and
dispose of properly.
TIPS AND RECOMMENDATIONS
• Using isopropyl alcohol, thoroughly clean exposed fiber and buffer ensuring both are free
from dust, oil,
and debris.
•
Do not lay ferrule dust covers on a dirty or dusty surface.
• Always use proper tools and/or accessories to terminate fibers and clean connector tips.
QUICK START GUIDE
The following instructions will help you quickly install your Leviton Opt-X
®
500i Enclosure for use in your equipment
cabinet or rack. For detailed information on each step, go to the page number listed below.
Safety and Installation Instructions
Pg. 2
Quick Start Guide
Pg. 2
Equipment Overview
Pg. 2
Standard Accessories
Pg. 3
Cover Removal & Optional Parts
Pg. 3
Port ID Labeling
Pg. 4
Fiber Ring Installation, Removal & Assembly
Pg. 5
Typical Applications
Pg. 6
1.
Splice Tray Alignment Pin
2.
Fiber Cable Management Ring
3.
Hook and Loop Lacing Points for securing Cable
4.
Removable Cover / Rear Door
5.
Cover / Door Locking Pins
6.
Hook and Loop Lacing Points for securing splice trays
7.
Cover / Door Locking Pin Attachment Mounting Tabs
8.
Rear Cable Entry Points
9.
Optional Strain Relief Kit Enclosure Mounting Points
10.
Adapter Plate Mounting Positions
11
. Label Mounting Position
Page 2 of 6
PK-93776-10-02-0B
EQUIPMENT OVERVIEW
Interior
/
Exterior
NOTE:
Cover removed for clarity.
1
2
3
4
5
6
7
8
9
10
11
