Chapter 2 Operation
Page 14
N1000-006
Recalling Submaster Scenes
To playback submasters, see the procedure below. In this example, we are recalling a submaster that
was previously recorded as submaster 1.
Procedure:
Notes:
1. Press
the
[FUNC]
key. The LCD displays:
Make sure the Master is at 100%.
2. Press the
[
T
]
key to select the sub function:
3. Press
[ENTER]
to select sub:
4. Press and Hold
[SUB1]
key:
Sub level is output at 100%.
-OR-
5. Raise Fader
[1]
:
Sub level is output at given level.
Submaster Bump Buttons
As shown in Step 4 above, pressing the bump buttons located below each fader allows individual
submasters to change quickly to full intensity (100%) while in SUB MASTER mode.
Recalling Memory Scenes
Follow the steps below to playback a scene that was recorded to memory. In this example, we are
recalling a scene that was previously recorded as scene 1.
Procedure:
Notes:
1. Press
the
[FUNC]
key. The LCD displays:
Make sure the Master is at 100%.
2. Press the
[
T
]
key to select the sub function:
(Continued on next page)
>CH SETTING
SUB MASTER
CH SETTING
>SUB MASTER
SUB MASTER 1--6
LEVITON CORP.
LOAD SUBSCENE 1
SUB MASTER 1--6
SUB1 = 100%
>CH SETTING
SUB MASTER
CH SETTING
>SUB MASTER
Содержание N1000-006
Страница 1: ...___________________________ User Guide N1000 006 Document Release Aug 2006 Revision A ...
Страница 4: ...Page ii N1000 006 User Guide ...
Страница 10: ...Chapter 1 Introduction Page 6 N1000 006 User Guide ...
Страница 29: ......
