background image

Page 3 

 

MSU-DFX SERIES 

Installation Instruction  

ERP: IIS00344 

03/11/2022  

Rev1.0 

Hard Ceiling Flange Cont’d 

Size 

Width 

Length 

2x2 

22-7/8 in. 

22-7/8 in. 

2x4 

22-7/8 in. 

46-7/8 in. 

Ceiling Cut-Out Dimensions: 

Frame (not supplied) 

1-5/8” Unistrut (or equal) 

Ceiling cut-out 

Swing-out Support Brackets 

(4-pcs) 

Width 

Length 

Содержание MSU-DFX Series

Страница 1: ...e reflected by surrounding surfaces such as ceilings and walls Since the reflec tive properties of surfaces can vary widely it should be considered as part of site planning Follow the manufactur er s recommendations for selecting appropriate ceiling and wall finishes d IT IS THE RESPONSIBILITY OF THE INSTALLER TO ENSURE THAT PERSONS WILL NOT BE EXPOSED TO EXCESSIVE UV OR OPTICAL RADIATION DURING E...

Страница 2: ...ling Burn Allow luminaire to cool before handling luminaire Personal Injury Wear safety glasses and gloves when handling the luminaire to avoid physical injury Avoid direct eye contact with light source Always support the weight of the luminaire Note The models requires an accurate cutout of the luminaire opening It is essential that the opening room side edge be flat to ensure the integrity of th...

Страница 3: ... IIS00344 03 11 2022 Rev1 0 Hard Ceiling Flange Cont d Size Width Length 2x2 22 7 8 in 22 7 8 in 2x4 22 7 8 in 46 7 8 in Ceiling Cut Out Dimensions Frame not supplied 1 5 8 Unistrut or equal Ceiling cut out Swing out Support Brackets 4 pcs Width Length ...

Страница 4: ...ge This step may require two workers 8 Adjust mounting Swing out support bracket s on housing to overlap T bar and support fixture on center web of T bar Tighten 20 screws to transfer weight to T bar making sure gasket is com pressed and grid is level without deformation 9 Secure to structure using seismic support cables wires to holes on Swing out support brackets Consult local code for requireme...

Отзывы: