Warranty Information
LIMITED FIVE YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its
sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the
purchase date. This Warranty is limited to repair or replacement of defective equipment returned Freight Pre-Paid to Leviton
Manufacturing at 20497 SW Teton Ave., Tualatin, Oregon 97062, USA. User shall call 1-800-959-6004 and request a return
authorization number to mark on the outside of the returning carton, to assure that the returned material will be properly
received at Leviton.
All equipment shipped back to Leviton must be carefully and properly packed to avoid shipping damage. Replacements or
repaired equipment will be returned to sender freight prepaid, F.O.B. factory. Leviton is not responsible for removing or
replacing equipment on the job site, and will not honor charges for such work. Leviton will not be responsible for any loss
of use time or subsequent damages should any of the equipment fail during the warranty period, but agree only to repair or
replace defective equipment returned to its plant in Tualatin, Oregon.
This Warranty is void on any product that has been improperly installed, overloaded, short circuited, abused, or altered in
any manner. Neither the seller nor Leviton shall be liable for any injury, loss or damage, direct or consequential arising out
of the use of or inability to use the equipment. This Warranty does not cover lamps, ballasts, and other equipment which is
supplied or warranted directly to the user by their manufacturer. Leviton makes no warranty as to the Fitness for Purpose or
other implied Warranties.
Notice
Although the information contained within this operation manual is believed to be accurate at the time of printing, it is not
guaranteed to be without fault and is subject to change without notice. For current information contact:
DANGER
Hazard of Electric Shock, Explosion or Arc Flash
Follow safe electrical work practices. See NFPA 70E in the USA, or applicable local codes.
This equipment must only be installed and serviced by qualified electrical personnel.
Read, understand and follow the instructions before installing this product.
Turn off all power supplying equipment before working on or inside the equipment. Use properly rated voltage
sensing device to confirm power is off. DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION
Only install this product on insulated conductors.
Failure to follow these instructions will result in death or serious injury.
NOTICE
This product is not intended for life safety applications.
Do not install this product in hazardous or classified locations.
The installer is responsible for conformance to all applicable codes.
Shop for Power Metering products online at:
1.800.561.8187
www.
PowerMeterStore
.ca
