AUTO SEQUENCING MODE
The DDS 53/5600 dimmers can be configured to perform stand alone Automatic Sequencing in place of Auto
Lamp Test. This is useful for lighting displays and show windows. The four channels will automatically fade
from one to another in a preprogrammed pattern and time selected by the front panel dipswitch whenever dipswitch
#8 is up and no multiplex signal is detected. The Analog control input will continue to operate while the dimmer
is sequencing.
To enable Automatic Sequencing Mode remove jumper from position P14.
Dipswitch settings
STEP TIME
SWITCH 1,2,3
PATTERN
SWITCH 4,5,6
1 SECOND
OFF,OFF,OFF
2 CHAN BUILD
OFF,OFF,OFF
3 SECOND
ON,OFF,OFF
3 CHAN SEQUENCE
ON,OFF,OFF
5 SECOND
OFF,ON,OFF
3 CHAN BUILD
OFF,ON,OFF
10 SECOND
ON,ON,OFF
2 & 4 CHAN ALT
ON,ON,OFF
15 SECOND
OFF,OFF,ON
4 CHAN SEQUENCE
OFF,OFF,ON
30 SECOND
ON,OFF,ON
4 CHAN BUILD
ON,OFF,ON
45 SECOND
OFF,ON,ON
4 CHAN BUILD +
OFF,ON,ON
60 SECOND
ON,ON,ON
4 CHAN RANDOM
ON,ON,ON
Dipswitch # 7 on causes all above sequences to ping-pong.
DDS 5300 / 5600 DIMMER PACK
Software Revision 1.33, Version C UL Versions
AUTO SEQUENCING MODE
NSI CORPORATION
7
