P a ge 1 0
When connecting Omni Consoles and/or OmniTouch Touchscreens, only use terminals labeled
DEVICE 5 – DEVICE 8, unless Switch “SW1” is in the “CONNECT” position. If “SW1” is in the
“CONNECT” position, then DEVICE 1 – DEVICE 4 may also be used Omni Consoles and/or OmniTouch
Touchscreens.
OMNI CONSOLES
RE
D
YELL
O
W
BLACK
GREE
N
FIRE
EVENTS
CANCEL
MESSAGE
MENU
AUX
SETUP
BUTTONS
STATUS
CONTROL
SECURITY
ALL
TEMP
POL
GREE
N
BLACK
YELL
O
W
RE
D
OMNITOUCH TOUCHSCREENS
AND/OR
Figure 8
Connect the terminals labeled “A” and “B” under the section marked “CONTROLLER” on the Power Hub to
the terminals labeled “A” and “B” under the section marked “CONSOLE” on the LEVITON controller,
respectively.
WARNING:
Do not connect terminals “A” or “B” under the section marked “CONTROLLER” on the Power Hub to the
terminals labeled “A” and “B” under the section marked “CONSOLE” on the LEVITON controller if
a) “SW1” is in the “CONNECT” position, AND
b) Either modular connector “J301” or “J302” is connected to a serial port (J1 – J5) on the LEVITON
controller.
WEB VERSION
www.
GlobalTestSupply
.com
Find Quality Products Online at:
