manualshive.com logo in svg

Leviton 3300 series, Инструкция по установке и эксплуатации, Страница: 41 / 48

Поделиться
Скачать
Leviton 3300 series Скачать руководство пользователя страница 41

11  Warranty and Contact Information

34

LIMITED 5 YEAR WARRANTY AND EXCLUSIONS

Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the 
time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years 
from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For 
details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor 
for removal of this product or reinstallation. This warranty is void if this product is installed impro perly or in an improper 
environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating 
conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, 
including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable 
jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is 
limited to five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without 
limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty 
obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, 
tort or otherwise.

FOR CANADA ONLY

For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton 
Manufacturing of Canada Ltd to the attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire 
(Quebec), Canada H9R 1E9 or by telephone at  
1 800 405-5320.

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules and ISED License-exempt RSS standard(s). Operation is subject 
to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept 
any interference received, including interference that may cause undesired operation.  Changes or modifications not 
expressly approved by Leviton could void the user’s authority to operate the equipment.
These limits are designed to provide reasonable protection against harmful interference in a commercial installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures: 
  - Reorient or relocate the receiving antenna. 
  - Increase the separation between the equipment and receiver. 
  - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
  - Consult the dealer or an experienced radio/TV technician for help.
This Class A digital apparatus complies with Canadian CAN ICES-3(A)/NMB-3(A)

TRADEMARK DISCLAIMER:

Use herein of third party trademarks, service marks, trade names, brand names and/or product names are for 
informational purposes only, are/may be the trademarks of their respective owners; such use is not meant to imply 
affiliation, sponsorship, or endorsement. PhaseChek is a trademark of DENT Instruments. 

FOR TECHNICAL ASSISTANCE CALL:

1-800-824-3005 (U.S.A. Only)

1 800 405-5320 (Canada Only)

Leviton Manufacturing Co., Inc.

201 North Service Road, Melville, NY 11747

Telephone : 1-800-824-3005

Visit Leviton’s Web site at http://www.leviton.com

© 2019 Leviton Manufacturing Co., Inc. All rights reserved.

Specifications and price subject to change at any time without notice.

PK-A3727-10-00-0A

WEB 

VERSION

Содержание 3300 series

















































Отзывы:

Нет отзывов