2L
2DL
2L PLUS
Type
biological
digital
biological
Magni cation, x
40–400
40–400
64–640
Head
monocular, rotatable 360°, inclined 45°
Optics material
optical glass
Body material
plastic
plastic
metal
Eyepiece tube diameter, mm
23.2
Eyepieces
WF10x
WF10x
WF16x
Revolving nosepiece
3 objectives
Objectives
4 , 10 , 40
4 , 10 , 40
4 , 10 , 40 s (spring)
Stage, mm
90x90, with specimen holders
Stage moving rage, mm
0–15, vertical
0–15, vertical
0–8, vertical
Focusing
coarse
Condenser
NA 0.65, diaphragm disk (6 apertures)
Illumination
upper and lower LED illumination with adjustable brightness
Power source
220V 50Hz, or 3*
batteries
Levenhuk K50 experiment kit
yes
Digital camera
no
yes
no
Speci cations
Levenhuk reserves the right to modify or discontinue any product without prior notice.
Notes:
1. The Levenhuk K50 experiment kit is supplied without an individual plastic case.
2. Batteries might be pre-installed in the battery compartment by the manufacturer.
Care and maintenance
• Never, under any circumstances, look directly at the Sun, another bright source of light or at a laser
through this device, as this may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
•
Take necessary precautions when using the device with children or others who have not read or who
do not fully understand these instructions.
• A er unpacking your microscope and before using it for the rst time check for integrity and durability
of every component and connection.
• Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please
contact your local specialized service center.
•
Protect the device from sudden impact and excessive mechanical force. Do not apply excessive pressure when
adjusting focus. Do not overtighten the locking screws.
• Do not touch the optical surfaces with your ngers. To clean the device exterior, use only special cleaning
wipes and special optics cleaning tools from Levenhuk. Do not use any corrosive or acetone-based uids
to clean the optics.
• Abrasive particles, such as sand, should not be wiped o lenses, but instead blown o or brushed away
with a so brush.
• Do not use the device for lengthy periods of time, or leave it unattended in direct sunlight. Keep the device away
from water and high humidity.
• Be careful during your observations, always replace the dust cover a er you are nished with observations
to protect the device from dust and stains.
• If you are not using your microscope for extended periods of time, store the objective lenses and eyepieces
separately from the microscope.
• Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open
re and other sources of high temperatures.
5