The digital camera is installed in the eyepiece tube in place of the eyepiece. It allows to observe specimens
in ne detail and true colors on your PC monitor and save images on the hard drive. Levenhuk ToupView
so ware allows viewing and editing the object images.
Using the microscope
Getting started
•
Unpack the microscope and make sure all parts are available.
•
Move the stage to the lowermost position using the focusing knob.
•
Make sure the batteries are correctly installed in the battery compartment; insert new batteries
if required. Or, you can connect the microscope to A/C power using the A/C adapter.
•
Insert the eyepiece into the eyepiece tube.
• Slowly adjust the illumination brightness, from dark to light.
Focusing
Selecting the objective
• Place a specimen on the stage and x it with the holders.
•
Select the 4x objective rotating the revolving nosepiece.
•
Move the specimen to place its thickest part exactly under the objective.
•
Rotate the focusing knob to slowly raise the stage until the objective is close to the specimen;
keep checking the distance between the objective and the object to avoid their contact.
CAUTION:
The objective should not touch the specimen, otherwise the objective or/and the specimen
might be damaged.
•
Look through the installed eyepiece and lower the stage slowly rotating the focusing knob until
you see the specimen image.
•
Such adjustment protects the frontal lens from contacting the object when you use objectives of other
magni cations; though, slight refocusing might be required.
• If the image is too bright, rotate the diaphragm disk until the passing light ray is reduced to a comfortable
brightness level. If the image is too dark, select a larger aperture to increase the light ray.
Start your observations with the lowest magni cation objective and select a specimen segment
for detailed research. Then move the specimen to center the selected segment in the eld of view,
to make sure it keeps centered when the objective is changed to a more powerful one. Once the segment
is selected, you should center its image in the microscope’s eld of view as precisely as possible.
Otherwise, the desired segment might fail to center in the eld of view of the higher power objective.
Now you can switch to a more powerful objective by rotating the revolving nosepiece. Adjust the image
focus if required.
Digital camera
Megapixels
0.3
Video recording option
yes
Mounting location
eyepiece tube (replaces the eyepiece)
Image format
*.bmp, *.jpg, *.jpeg, *.png, *.tif, *.ti , *.gif, *.psd, *.ico, *.emf, etc.
Exposure
ERS
White balance
auto/manual
Exposure control
auto/manual
So ware
Levenhuk ToupView
So ware image control
image size, brightness, exposure control
Port
USB 2.0, 480Mb/s
System requirements
Windows XP/Vista/7/8/10 (32 and 64 bit), processor up to 2.8GHz
Intel Core 2 or higher, USB 2.0 port
Camera power supply
USB cable
4
