LevelOne WBR-1101TX User Guide
Telephone
•
If using a Leased Line (permanent connection ), ignore these
fields.
•
Otherwise, enter the telephone numbers to dial to connect to
your ISP (Internet Service Provider). The first number is re-
quired; the others are optional.
•
Enter the telephone numbers using the format described in
your modem's user manual.
Dial on Demand
•
If
Checked
, the modem will automatically dial the ISP when
an Internet connection is required. (Provided Internet Access
is enabled.)
•
If
Unchecked
, the connection to the ISP must be established
manually, using the "Dial" button on the
Serial Port Status
screen.
Disconnect after Idle
Time
•
If checked, the Internet connection will be terminated after
being idle for the time specified.
•
If not checked; the Internet connection will never be termi-
nated.
Modem Type
•
Select
None
,
Permanent Connection
or
Modem
to match your
system.
•
For
Modem
:
•
If your modem is in the drop-down list, just select it.
•
If your modem is not in the list, select "_Standard Mo-
dem" and test to see if this works.
•
If "_Standard modem" does not work, select "Other",
then click the
settings correctly.
See
Modem Properties Screen
in Chapter 6 for further
details.
Modem Properties
•
Clicking this button will open the
Modem Properties
screen
and allow changing of the modem's properties. Normally,
this is not required.
•
See
Modem Properties Screen
in Chapter 6 for further
details.
Serial Line Speed
•
Select the speed which is equal to or below the fastest
SERIAL line speed (NOT phone line speed) of your modem.
Available speeds range from 4.8K to 460.8K(bps).
Other Configuration
Once the "Quick Setup" screen and the appropriate "Configuration" sub-screen is completed,
the LevelOne WBR-1101TX is ready for use.
•
If you wish to use WEP, or change other Wireless Access Point settings, refer to the
following section.
•
Your PCs may require configuration. Refer to
Chapter 4 - PC Configuration
for details.
•
To check the status of the LevelOne WBR-1101TX, and confirm that it is working cor-
rectly, refer to the
Status Screen
section later in this Chapter.
24