Access Point Management
71
SNMP
SNMP (Simple Network Management Protocol) is only useful if you have a SNMP
program on your PC. To reach this screen, select
SNMP
in the
Management
section
of the menu.
Figure 60: SNMP Screen
Data - SNMP Screen
General
SNMP
Use this to enable or disable SNMP as required
Read Only com-
munity
Data can be read, but not changed.
Read/Write
Community
Data can be read, and setting changed.
SNMPv3
User Name
Enter the user name for SNMPv3.
Authentication
Protocol
Select the authentication protocol used by SNMPv3.
Authentication
Key
Enter the authentication key required by SNMPv3.
Private Protocol
Select the private protocol as required.
Private Key
Enter the private key here.
Managers
Any Station
The IP address of the manager station is not checked.
Only this station
The IP address is checked, and must match the address you
enter in the IP address field provided.
If selected, you must enter the IP address of the required
station.
Содержание WAP-6012
Страница 1: ...LevelOne WAP 6012 300Mbps N_Max Wireless Gigabit PoE Access Point User Manual V1 0...
Страница 4: ......
Страница 12: ...Wireless Access Point User Guide 8 Figure 5 Using PoE Power over Ethernet...
Страница 105: ...Appendix E Command Line Interface 101...
