LevelOne WAP-6012, Руководство пользователя

Страница: 40 / 105

Wireless Access Point User Guide
36
Advanced Settings
Clicking the Advanced Settings link on the Wireless menu will result in a screen like
the following.
Figure 24: Advanced Settings
Data - Advanced Settings Screen
Options
Worldwide Mode
(802.11d)
Enable this setting if you wish to use this mode, and your
Wireless stations support this mode.
WMM
Enable WMM Sup-
port
Check this to enable WMM (Wi-Fi Multimedia) support in
the Access Point. If WMM is also supported by your wire-
less clients, voice and multimedia traffic will be given a
higher priority than other traffic.
No Acknowledge-
ment If enabled, then WMM acknowledgement is disabled.
Depending on the environment, disabling acknowledge-
ment may increase throughput slightly.
Parameters
Disassociated Time-
out This determines how quickly a Wireless Station will be
considered "Disassociated" with this AP, when no traffic is
received. Enter the desired time period.
Fragmentation
Length
Enter the preferred setting between 256 and 2346. Nor-
mally, this can be left at the default value.
Beacon Interval
Enter the preferred setting between 20 and 1000. Normal-
ly, this can be left at the default value.
RTS/CTS Threshold Enter the preferred setting between 1 and 2347. Normally,
this can be left at the default value.
Preamble Type
Select the desired option. The default is "Long". The
"Short" setting takes less time when used in a good envi-
ronment.