11a/b/g Wireless Multi-Client Bridge/AP/WDS
Version 1.0
50
DITM Interval
: A DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages. When the wireless Access Point has
buffered broadcast or multicast messages for associated clients, it sends the next
DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to
receive the broadcast and multicast messages. The default value is 1. Valid settings
are between 1 and 255.
Transmit Power
: You may control the output power of the device by selecting a
value from the drop-down list. This feature can be helpful in restricting the coverage
area of the wireless network.
Note:
1. Transmit power is regulated by international standards and users are
forbidden to change its maximum limit.
Layer 2 Isolation
: Enable this feature if you would like this device hidden under
windows neighborhood. Users at a hotspot will not be able to share files through a
neighborhood.
WDS
: Place a check in this box to enable WDS (Wireless Distribution System).
When WDS is enabled, this access point functions as a wireless repeater and is able
to wirelessly communicate with other APs via WDS links.
Note
that WDS is incompatible with WPA -- both features cannot be used at the
same time. A WDS link is bidirectional; so this AP must know the MAC Address
(creates the WDS link) of the other AP, and the other AP must have a WDS link back
to this AP. Make sure the APs are configured with same channel number.
WDS AP MAC Address
: Specify one-half of the WDS link. The other AP must also
have the MAC address of this AP to create the WDS link back to this AP.
Click on the
Save Settings
button once you have modified the settings.
4.3.6 SNMP
Click
on
the
SNMP
link under the
Wireless
menu. The page allows you to create the
community name and password if you would like remotely manage the device using
a SNMP client.
Support WebAdmin Control:
Select
Enable
if you would like to use the SNMP
feature.
Read-Only Community Name
: Specify the password for access the SNMP
community for read only access.
Read-Write Community Name
: Specify the password for access to the SNMP
community with read/write access.
Send SNMP Trap
: Select
Enable
if you would like to receive SNMP traps.
Send Trap To
: Specify the IP address that would receive the SNMP traps.