WAB-3001/WAB-3002 11b/g Wireless Outdoor Client Bridge/AP
Version 1.0
26
SNMP Daemon:
Select
Enable
if you would like to use the SNMP feature.
Read-Only Community Name
: Specify the password for access the SNMP
community for read only access.
Read-Write Community Name
: Specify the password for access to the SNMP
community with read/write access.
Send SNMP Trap
: Select
Enable
if you would like to receive SNMP traps.
Send Trap To
: Specify the IP address that would receive the SNMP traps.
Trap Community Name
: Specify the password for the SNMP trap community.
Click on the
Save Settings
button once you have modified the settings.
4.4 Wireless
Click on the
Wireless
link on the navigation drop-
down menu. You will then see four options: basic
settings, advanced settings security and site survey.
Each option is described below.
4.4.1 Basic Settings (Infrastructure, Adhoc)
Click on the
Basic Settings
link under the
Wireless
menu. Using this option you
may configure the 802.11b/g settings as well as the frequency, channel, and SSID.
Band:
Depending on the type of wireless clients that are connected to the network,
you may select
B
,
G
, or
B+G
. If you are not sure about which clients will be
accessing the wireless networks, it is recommended that you select
B+G
for the best
performance.
SSID
: The SSID is a unique named shared amongst all the points of the wireless
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters.
