WAB-3001/WAB-3002 11b/g Wireless Outdoor Client Bridge/AP
Version 1.0
17
4 Bridge/Bridge Router Mode – Web
Configuration
4.1 Logging In
To configure the Bridge through the web-browser, enter the IP address of the Bridge
(default:
192.168.1.1
) into the address bar of the web-browser and press
Enter
.
Make sure that the Bridge and your computers are on the same subnet. Refer to
Chapter 2
in order to configure the IP address of your computer.
Username
:
levelone
; Password
:
levelone
After logging in you will graphical user interface (GUI) of the bridge. The navigation
drop-down menu on left is divided into three main sections:
1.
Management
: This includes operation mode, status, statistics, logs, upgrade
firmware, save/reload settings, and password.
2.
TCP/IP Settings
: This includes the configuration of the LAN port and settings for
the LAN IP, subnet mask, DHCP client, spanning tree and MAC cloning.
3.
Wireless
: This includes the basic, advanced, security and site-survey settings for
the wireless interface.
The Bridge status page is also displayed once you have logged in. This includes
details about the system, wireless, and TCP/IP configuration.