background image

User Manual 

Publication date: May, 2005 

Revision A1 

83 

 

3-11-2. Tag-based Group 

 

 

Function name: 

Tag-based Group Configuration 

Function description: 

It shows the information of existed Tag-based VLAN Groups, You can also 
easily create, edit and delete a Tag-based VLAN group by pressing 

<Add>

,

 

<Edit> 

and 

<Delete>

 function buttons. User can add a new VLAN group by 

inputting a new VLAN name and VLAN ID. 

Parameter description:

 

VLAN Name: 

The name defined by administrator is associated with a VLAN group. 
Invalid letters are #,%,&,’ and “ ( total 5 letters ). Other special characters 
will not be accepted. The maximal length is 15 characters. 

VID: 

VLAN identifier. Each tag-based VLAN group has a unique VID. It 
appears only in tag-based or Double-tag mode. 

SYM-VLAN: 

While the SYM-VLAN function of the group is enabled, all packets with 
this group VID will be dropped in case they are transmitted from the ports 
that do not belong to this group.  

Member:   

This is used to enable or disable if a port is a member of the new added 
VLAN, “Enable” means it is a member of the VLAN. Just tick the check 
box (

)

 beside the port x to enable it. 

 

 

Fig. 3-29 

Содержание ProCon GSW-1291











































































































































































































































Отзывы: