Network Video Recorder Administrator’s Manual
62
Event-Recording File Length
Before setting the recording schedule, you may define the length of an event recording. To do
this, configure the following properties shown as below, which will make an event recording
as long as 10+30 second:
Field
Description
Pre-event
Recording
Buffer (sec)
:
NVR keeps a short cache of video received from devices. If an event
is triggered, NVR will automatically store the pre-event buffer along
with the recording of the event itself.
Post-event Recording
Buffer (sec):
This will determine how long after the event is triggered should be
included in the event recording file.
Set the Recording Schedule
On the time table
1.
Click on the recording mode from
Field
Description
Full-Time Recording
Continuously record at the video frame rate you define in
Camera
Settings
.
Event Speed Up
Recording
Continuously record everything at 1FPS, when an event occurs, the
frame rate will switch to the value you define in
Camera Settings
,
and automatically switch back to 1FPS after the event ends.
Event Recording
Only events are recorded, at the video frame rate you define in
Camera Settings
.
2.
Click and drag over the “
Time Track
” to set time period.
3.
Click “
Save
”.
Set the Event Schedule
The
Event Schedule
defines when the event handling is activated. To set the event rules,
please refer to Set Event Rules on page 65.