Network Video Recorder Administrator’s Manual
114
Set Recording Schedule
For the recording schedule, NVR supports
Schedule recording
,
Event recording
and
Event Speed-up Recording
modes, which are set up on a week-based timetable; the
event-handling schedule is configured here.
On NVR
, you can configure camera’s recording schedule on 7 days / 24 hours basis. The
schedule is split into segments of one-hour-length. By default, once a device is added to the
system, its schedule is automatically set to full-time schedule recording and event handling.
You should configure it according to your system plan.
Go to
Setup
page
Schedule
tab, and select a camera to configure its recording schedule.
Event-Recording File Length
Before setting the recording schedule, you may define the length of an event recording. To do
this, configure the following properties shown as below, which will make an event recording
as long as 10+30 second:
