LevelOne IES-2881, Руководство пользователя

Страница: 89 / 162

User Manual Page 89
System
System Information, System Name/Password, IP Address, Save Configuration, Firmware
Upgrade, Reboot, Logout
System Name/Password
System Name:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use hostname command to set or change the network server name.
Use the no hostname command to disable this function.
3.
Command Syntax:
(no) hostname HOSTNAME
HOSTNAME specifies the network name of the system.
4.
Example:
The following example sets the hostname to switch , and shows the change in the prompt:
switch_a(config)#hostname switch
switch(config)#
Password:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use enable password command to modify or create a password to be used when
entering the Enable mode.
3.
Command Syntax:
enable password PASSWORD
PASSWORD specifies the new password of the system.
4.
Example:
The following example sets the new password mypasswd to switch:
switch_a(config)#enable password mypasswd
switch_a(config)#