LevelOne IES-2881, Руководство пользователя

Страница: 111 / 162

User Manual Page 111
no bridge GROUP forward-time
GROUP <1-1> The ID of the bridge group to which this delay time is assigned.
FORWARD_DELAY <4-30> the forwarding time delay in seconds.
4.
Example:
The following example sets the forward-time FORWARD_DELAY ( 30 ) of bridge GROUP
( 1 ):
switch_a(config)#bridge 1 forward-time 30
switch_a(config)#
RSTP Port Setting
Priority(Granularity 16):
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if )#
2.
Usage:
Use this command to set the port priority for a bridge. The lower priority indicates a
greater likelihood of the bridge becoming root.
3.
Command Syntax:
bridge GROUP priority PRIORITY
GROUP <1-1> the ID of the bridge group.
PRIORITY <0-240> The priority to be assigned to the group.
4.
Example:
The following example sets the priority PRIORITY ( 100 ) of the interface fe1 (port 1) of
bridge GROUP ( 1 ):
switch_a(config)#interface fe1
switch_a(config-if )#bridge 1 priority 100
switch_a(config-if )#
Admin. Path Cost:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1