manualshive.com logo in svg

LevelOne GSW-2494, Руководство пользователя, Страница: 109 / 227

Поделиться
Скачать
LevelOne GSW-2494 Скачать руководство пользователя страница 109

User Manual 

Publication date: May, 2005 

Revision A1 

105 

 

Per Trunking Group supports a maximum of 12 ready member-ports. Please 

note that some decisions will automatically be made by the system while you are 
configuring your trunking ports. Some configuration examples are listed below: 

 

a)   12 ports have already used Static Trunk Group ID 1, the 13th port 

willing to use the same Static Trunk Group ID will be automatically set 
to use the “None” trunking method and its Group ID will turn to 0. This 
means the port won’t aggregate with other ports.  

 b)  14 ports all use LACP Trunk Group ID 1 at most 12 ports can 

aggregate together and transit into the ready state. 

 c)  A port using the “None“ trunking method or Group ID 0 will be 

automatically set to use the “None” trunking method with Group ID 0. 

 

Содержание GSW-2494




































































































































































































































Отзывы:

Нет отзывов