LevelOne GNS-8000A, Руководство пользователя

Страница: 54 / 87

53
Chapter 7
GNS-8000A - Maintenance
The GNS-8000A has been specially designed to run on 24 hours, 7 days a week
and to be ready at all times. It is also robust to protect against system crashes
caused by power loss. This section provides a general maintenance overview.
7.1 Shutdown/Restart the Server
Please use the following steps to shutdown/restart the server:
1. Ask all the connected users to save their working files and stop using the GNS-
8000A.
2. Open the administration web page and go to System Tools ·
Restart/Shutdown . Follow the instructions to restart or shutdown the
system.
7.2 Reset the Administrator Password & Network
Settings
If you accidentally forget the administrator password, you will not be able to
perform any administration work on the GNS-8000A. Under this condition, you
can reset the administrator password and network configuration to the factory
default.
1. Use the tip of a ball point pen and depress the configuration reset switch
located on the back of the GNS-8000A. Hold it for about 5 seconds until the
beep.
2. The network configuration will be reset, and you may need to re-configure
some or all of the network settings before you can connect to the GNS-
8000A.
3. Use a web browser to connect to the GNS-8000A. Enter the System
Administration and enter the following login name and password.
Login: Administrator
Password: admin
You can then perform system administration.
Note : If the configuration reset switch is disabled in the System
Tools · Hardware Settings page, you are no longer able to use this
function. Please remember your administrator password.