70
Parameter description:
Status:
Include “Normal” or “Active” two kinds of status. The former means the port is ready
to link and supply the power to the PD at any time. The latter means the port is in
the condition of supplying the power.
State:
“Enable” means the manager allows the power supplied to the PD is legal while the
port linked to the PD; “Disable” means the port does not own PoE function.
Priority:
Three options are offered for the user to choose, including Normal, Low and High.
Default is Normal. The switch will stop supplying the power to the port based on the
order of the priority Low
Norm a lHigh in ca s e tota l powe r re quire d b y a ll P Ds
linked to the switch excesses the power limit. As the ports have the same priority,
then the switch will cease the power supplement from the port with the highest port
id (12
1).
Power(W):
The power is consumed by the port.
Current(mA):
The current is supplied to the PD by the port.
Class:
The Class of the PD linked to the port of the switch.
Delay time:
The Delay time is using for set the time period for PD PoE enable time delay period.
It is a solution to avoid rush current to cause shorter PD. The available time period
is from 0 to 300 seconds and 0 means disable the function. 71
Содержание GEP-2450
