Level One Printer Servers
Mail Server Name
or IP Address
This is the name or IP Address of your Mail Server. If
you are on a LAN, ask the LAN Administrator. If using
a dial-up connection, use the data provided by your ISP.
Your Internet
E-mail Address
The normal address that people use to send you E-mail.
Retry Interval
(Seconds)
If unable to connect to the E
-
Mail server, retry after this
time period (1 to 255 seconds, 30 is usually OK).
Reply Notification
Mail
Check to receive an E
-
Mail when your print job has
been processed.
5. On completion, a new printer port will have been created.
Using the new Port
The Windows Control Panel is used to connect the correct printer to the InterNet Printing Port.
In Windows 95/NT, the procedure is:
1. Select the Printer which matches the remote printer, then choose
Properties
, as shown in
the example below.
Figure 41: InterNet Printer Properties
2. Select the new port - WAN (InterNet Printer) in the example - as the port for this printer.
•
If you do not have the correct printer driver, or you wish to create another printer
using an existing driver, use the Windows
Add Printer
facility.
•
Using the Windows
Port Settings
or
Configure Port
facility will reveal the same
Configure Port
screen shown in Figure 40: InterNet Printer Port.
•
If you wish to print to multiple Internet Printers, use the Windows
Add Port
facility to
add a new InterNet Printer port. Ensure that the correct data is entered in each port,
and that each port has a unique name.
Checking the Printer Driver
To make sure that the correct printer driver for the remote printer is installed on your system,
you can use the InterNet Printing Port to send an E
-
Mail to the Internet Printer. The procedure
is as follows:
- 52 -
