Level One Printer Servers
Port Tab
This screen has 2 panels -
Physical Port
and
Logical Port
.
Physical Port
The following settings are available:
•
Selected Physical Port
- Select the Physical Printer Port you wish to configure.
•
Handshake Signal
- Select
Busy Only
or
Busy & Ack
for the Physical Port.
•
Printer Type -
Select
High Speed
or
Low Speed
for the Printer Type.
Logical Port
Logical Ports (printers) can be used in the Unix environment. The following settings are
available:
•
Selected Logical Port
- Select the Logical Printer Port you wish to configure.
•
Map to Physical Port
- Select the physical Printer Port which the Logical printer will use.
•
Convert LF to LF+CR
- If checked, LF (line feed) characters are changed to CR+LF
(carriage line feed).
•
Prefix of Job
- The printer control string (
in hex
) to be sent to the printer before each print
job. This string cannot exceed 15 characters.
•
Suffix of Job
- The printer control string (
in hex
) to be sent to the printer after each print
job. This string cannot exceed 15 characters.
Figure 29: Port Screen
The
Get Defaults
button will reset all settings to their factory-default values.
- 34 -
