Client Setup
Figure 13: Configure Printer Port
4. Select the correct Windows printer in the
Existing Printers
list, and click the
Connect
button.
If the correct printer type is not listed, click "Add New Printer" to run the Windows
Add
Printer
wizard. Step through the Wizard and install the required printer:
•
Select the correct Printer Manufacturer and Model, or use the "Have Disk" option if
appropriate.
•
We recommend changing the Printer name to indicate which device is on.
(e.g. HP2100 on SCA43600_P1)
•
If prompted about Sharing the printer, do NOT enable Sharing.
•
When the Printer installation is finished, it will be listed in the
Configure Printer Port
screen above. Select it and click
Connect
.
5. Installation is now complete. You can now print using this printer.
•
To install additional Printers, repeat steps 4.
•
Use the
Start
menu to run this program in future. The default installation is
Start -
Programs - PrintServer Driver - Print Driver Setup
.
Note:
If using the
Epson Spooler Manager
, this program must be disabled, as follows:
1. Run the Epson Spooler Manager.
2. Select "Queue Setup" from the menu.
3. Click "Use Print Manager for this port".
4. Click "OK" to exit.
Management
•
Print jobs can be managed like any Windows printer. Open the
Printers
folder (
Start -
Settings - Printers
) and double-click any printer to see the current print jobs.
•
If the printer attached to the LevelOne Printer Server is changed, just run this program
again, and select the correct printer.
•
To delete a port created by this setup program, use the Windows
Delete Port
facility:
•
Right-click any printer in the
Printers
folder, and select
Properties
.
- 17 -
