LevelOne FPC-0104TX, Руководство пользователя

Страница: 29 / 35

-23-
C:No free I/O space or interrupt request can be assigned to the PCMCIA card.
A: The FPC-0104TX 10/100Mbps Fast Ethernet 56K Modem PC Card needs 32
contiguous I/O ports and one interrupt request for LAN. It also need 8
contiguous I/O ports and another interrupt request for 56K Fax/Modem. The
LAN ports have to be located at one of the following I/O space. 0x300, 0x320,
0x340, 0x360. The 56K Fax/Modem ports have to be located at one of the 0x2F8,
0x3E8, 0x3E8. Besides for the compatibility consideration with some of the 56K
Fax/Modem applications. The Modem interrupt (MIR) is recommended to be
assigned at value less than 7 (IRQ3 to 6). Make sure that the resources are
available for the LAN/Modem card.
Q:How can I know the LAN/Modem card has been enabled or not ?
A:If the Card Service is installed, you can check by hearing the beep when card
insertion.
A:Run CARDEN /CHK to check, if the card has been enabled. The resources
allocated for the card are shown as below at the last line of display message.
“ IOP=0Xnnn IRQ=nn COM=nn MIR=nn ”
Q: How to install the Win 95 driver over SystemSoft CardWorks ?
A:1.Start the Win 95 then plug the LAN/Modem card into the PCMCIA slot. The
SystemSoft Cardwizard window should appear.
2.Select the appropreate slot number which the LAN/Modem card is plugged in.
3.Select
View pull down menu
4.Select Properties .
5.Select Drivers in Properties.
6.Select Change Card Driver to active the selective items above it.
7.Select Use Plug and Play.
8.Press OK . Win 95 will request to withdraw the card.
9.Insert the card again.
10.Follow the instruction to insert the diskette and input the path A:\ for
LAN/Modem driver.
11.Add client and service as you wanted by Network Icon in Control Panel .
12.Reboot the system
Q: The Netware driver runs successfully but fails to login on to the Netware
server
C: Frame type imcompatiable with server.
A: The default frame type for Netware 3.11 and before is 802.3 but it changed to
802.2 in Netware 4.x and 3.12. You may check the content of NET.CFG to see if
the frame type is accepted by the server or not. If the frame type can not be