LevelOne FPC-0104TX, Руководство пользователя

Страница: 17 / 35

-11-
If Network has been installed
♦
Select ADAPTERS
♦
Press ADD to add network adapters
♦
Press HAVE DISK button
♦
Insert your DirectPort PC Card driver disk into floppy disk drive
♦
Enter the correct path for Windows NT 4.0 drivers then press OK .
♦
A dialog box will pop up. Give appropriate system resources to the DirectPort
PC Card; the settings must be unique for this device. Refer to ”Resources
Recommendation” for NT 3.51 details
♦
Press OK when all setting are completed.
♦
Press CLOSE to complete NETWORK setting
♦
Reboot Windows NT.
Modem configuration for NT 4.0
1. Open MY COMPUTER
à
CONTROL PANEL
à
MODEMS
2. Using default settings and press NEXT
3. System should have detected your LANmodem PC Card, and enter the Modem
Manufactures & Models list screen.
4. Press FINISH and then CLOSE to complete modem setting.
5. Reboot the system.
6. The installations for both LAN and Modem are completed.
2.2.6. Windows 98/95 Installation
1.Assume that the PCMCIA card reader and drivers have been loaded and well
functioning. The System Icon in the Control Panel can report on its functionality.
If not, check your computer dealer for technical support.
2.Insert your Integrated PC Card into PCMCIA slot. Windows 95/98 will prompt
New Hardware Found dialog box. In New Hardware Found dialog box, select
Driver from disk provided by hardware manufacturer .