User's Manual - 71
Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom/Focus operation via
the control panel and how to preset positions.
Preset Locations
On this page, you can preset positions for the Network Camerato go to directly or patrol. A total of 128
preset positions can be configured.
Please follow the steps below to preset a position:
1. Adjust the shooting area to a desired position using the buttons on the right side of the window.
2. Click
Set as home
or
Default home
to define your home position.
3. Enter a name for the preset position, which allows for up to forty characters. Click
Add
to enable the
settings. The preset positions will be displayed under the Preset Location list on the left-hand side.
4. To add additional preset positions, please repeat step 1~3.
5. To remove a preset position from the list, select it from the drop-down list and click
Delete
.
6. Click
Save
to enable the settings.
functions are the same
as the control panel on
home page
1
2
3
5
6
3
