13
12
Chapter 3 Operations
Chapter 3 Operations
3.3 Fingerprint Enrollment
3.4 Master Fingerprint
The three fingerprints of “000-002” are read as master fingerprints
Functions of master fingerprint:
1. Unlock the door
2. Set code/fingerprint
3. Delete code/fingerprint
3.4.1 Operation of setting master fingerprint
Use specialized tools remove the cylinder cover, insert mechanical key, turn the key clockwise(right handle
lock) or anti-clockwise(left handle lock), a long “Di…” sounded, red and blue light flashes alternately, press
“#” once, enter position number of master fingerprint”000-002” ,then press “#” again to confirm, and
fingerprint window lights up, indicating the lock is under the state of master fingerprint setting.
Put the finger onto the fingerprint window. When a short “Di-” is sounded, the first fingerprint identification succeeds.
Do not remove finger until a long “Di-”is sounded, blue light flashes once, and digital display firstly shows”000”and
then black out, which indicates the success of the enrollment operation, and the position of this master fingerprint is
“000”.
Following instruction A, but the red light flashes, together with two short “Di-Di-”.It means the operation fails.
A
.
B
.
3.4.2 Operation of setting other fingerprints with master fingerprint
Put the finger onto the fingerprint window. When a short “Di-” is sounded, the first fingerprint identification succeeds.
Do not remove finger until a long “Di-”is sounded, blue light flashes once, and digital display firstly shows “003”and
then black out, which indicates the success of the enrollment operation, and the fingerprint has been registered in the
position of “003”.
A
.
Press “#” continuously for 3 seconds, a long “Di…” sounded, red light and fingerprint window lights up. Put the master
finger onto the fingerprint window, after a long “Di…”is sounded, red and blue light flashes alternately, continually
press “#” twice, red light on, digital display shows any number from“003-099”(stands for the smallest position number
of a new fingerprint. If you want to enroll the fingerprint in a specific position, please press “#” first and input the
specific position number), fingerprint window lights up, indicating the lock is under fingerprint enrollment state.
Following instruction A, but the red light flashes,
together with two short “Di-Di-”.It means the
operation fails.
digital display “000”,
B
.
3.4.3 Operation of setting code with master fingerprint
Input an eight-digit code started with 01 or 02, press “#” to confirm, digital display shows correspondingly “n1”or”n2”,
accompanied with a short “Di-”from buzzer. Re-input the code again and confirm it by pressing”#”, a long “Di–-”
sounded, blue
light flashes once ,and “n1”or “n2” is shown again. It means the success of the setting operation
(Note: “n1”or “n2” is the corresponding code position)
A
.
Press “#” continuously for 3 seconds, a long “Di…” sounded, red light and fingerprint window lights up. Put the master
finger onto the fingerprint window, after a long “Di-”is sounded, red and blue light flashes alternately, then press “#”
once, red light on, digital display shows “---”
Use specialized tools to remove the cylinder cover, insert mechanical key and turn the key clockwise(right handle lock) or anti-clockwise
(left handle lock), red and blue light flashes alternately, at hearing a long “Di—”, continually press “#” twice, red light on, digital display
shows “003-099” , and fingerprint window lights up, indicating the lock is under fingerprint enrollment state.
Put the finger onto the fingerprint window. When a short “Di-” is sounded, the first fingerprint identification succeeds. Do
not remove finger until a long “Di—” is sounded, blue light flashes once, and digital display shows “003 ”, which indicates
the success of the enrollment operation.
A
.
Following instruction A, but the red light flashes, digital display shows “000” first and then “- ”, together with two short “Di-
Di-”. It means the operation fails.
--
B
.
If the same fingerprint is enrolled for the second time, its previously registered position number will be shown on digital
display, blue light flashes one time and a long “Di—” sounded, and then exit fingerprint enrollment state.
C
.
“003” shown on the digital display is the smallest unregistered fingerprint position.
Note:
