17
16
Chapter 3 Operations
Chapter 3 Operations
3.7 Unlock with Fingerprint
3.8 Unlock with Code
3.9 Deletion of One code
Remove the cylinder cover, insert mechanical key and turn the key clockwise(right handle lock) or anti-clockwise (left handle lock),
a long “Di——” sounded, red and blue light flashes alternately, press “*”, red light on, and the digital display shows “---” and flickers,
which indicates the lock is under deletion state.
A
.
Input the code to be deleted, for example “01******”, and press “#” to confirm. If the buzzer gives out a long “Di
”, and digital
display flickers “n1” and then get static, it means the deletion operation succeeds.
—
B
.
If the buzzer gives out two short “Di-”, and red light flashes once, it means the deletion operation fails.
C
.
Note: If not sure the code input is correct or not, press “*” to return and stop the operation, buzzer gives out two short “Di-” by the
mean time. If no further operation is made in 10 seconds, the system will get out of the deletion state automatically, accompanied
with two short “Di-” from the buzzer.
3.10 Deletion of One Fingerprint
Put any one finger onto the fingerprint window, fingerprint window lights up,
flickers once, and display shows “n n n”. At this moment, handle can be turned to open the door.
buzzer gives out a short “Di-” and blue light
A
.
Press
the fingerprint window, when hearing a short “Di-” and blue light flickers once. At this moment, handle can be turned to
open the door.
“#”, buzzer gives out a short “Di-” and the fingerprint window lights up, and display “n n n”, put any one finger onto
B
.
3.7.1. When the lock is still under initialization state (no code or fingerprint inside)
3.7.2. When the lock is registered with fingerprints
Put the valid fingerprint onto the fingerprint window, when hearing a short “Di-”, blue light flickers, and display shows this
fingerprint position number, for example, “009”. At this moment, handle can be turned to open the door.
A
.
Press “#”, buzzer gives one short “Di-” sound, fingerprint window lights up, put the valid finger onto the fingerprint window,
when hearing a short “Di-” and display shows this fingerprint position number, for example, “009”. At this moment, handle
can be turned to open the door.
B
.
Note:
flickers. Handle can not be turned to open the door.
If fingerprint is not valid, or if the valid fingerprint is not read properly, buzzer gives out two short “Di-” and red right
Input one valid 8-digit code (at most 30 numbers can be input for hiding the real code, but the valid 8-digit code must be input
continuously), when hearing a short “Di-” and seeing blue light flickers, digital displays shows the code number, “n1” for example,
then turn the handle to open the door.
A
.
If input an invalid code, the buzzer gives out two short “Di-”, red light flickers, and turn the handle, the door is not opened.
B
.
Remove the cylinder cover, insert mechanical key and turn the key clockwise(right handle lock) or anti-clockwise (left handle
lock), a long “Di——” sounded, red and blue light flashes alternately, press “#”, red light on, and the digital display shows “---”
and flickers, which indicates the lock is under deletion state.
A
.
Input the position number of fingerprint to be deleted, for example, input “008 , and the digital display show from “
” to “008 ,
press “#” to confirm, if the buzzer gives out a long “Di-”, blue light flashes once, it means the deletion operation succeeds.
”
---
”
B
.
If the buzzer gives out two short “Di-”, and red light flashes once, it means the deletion operation fails.
C
.
Note: It is applicable for all fingerprints’ deletion, including master fingerprints.
Note: If the fingerprint is not read properly, the buzzer gives out two short “Di-”, red light flickers, handle can not be turned
to open the door.
No
initialized
code
is
set
after
produced
from
the
factory
.
C
.
