3
1. Description and Usage of Product.
GSM Gate GB 200 is two-way converter of classic phone line for calls to cell phone GSM network.
At the same time device allows dispatch of prepared SMS messages on the basis of changes in
voltage on inputs and evaluation of incoming SMS messages for set-up of outputs.
1.1. Content of Delivery.
1 x GSM Gate GB 200.
1 x Network adapter 12 V ss.
1 x Serial cable for PC 2m.
1 x Floppy disc with programs GB200cfg, GBserver and GBsms.
1 x Phone cable for trial connection of phone or exchange.
1 x External aerial mast with cable 3m.
1 x Fixation set – fasteners, screws and drilling template.
1 x Instructions manual.
1.2.
Equipment, which can be bought additionally
Connector CANNON15 with cover.
Connector CANNON15 with built-in micro-relay for separation of circuits.
2. Safety Instructions.
GSM Gates by LEVEL are conformable with technical standards for operation in our mains. Power
source with voltage 10.6 – 16 V ss fitted with connector with positive central contact shall be used
for power supply. Dimension for current 600mA – maximum power take-off during call, securing –
safety-fuse T 1A.
Device must be disconnected from all power sources before maintenance or exchange of parts or
filled boards.
No fluids must enter the device. Danger of fire or injury by electric current impend. Do not place
device into rooms with high temperatures, strong vibrations or high humidity.
In case you moved device from cool to warm room do not set it into operation immediately. Let
device warm up to temperature of room. Wait until condensed water evaporates.
3. Installation.
3.1. GSM Gate Assembly.
GSM Gates by LEVEL are designed for operation in dry places. During assembly avoid hot
places and places where device would be exposed to direct solar radiation or places close
to heating elements.
Do not place GSM Gate or aerial mast close to phone exchange or other electronic device
or line. Due to high-frequency electromagnetic field these devices could be interfered.
Choose such a place where interference is minimal. Due to interference it is also not
advisable to operate the device close to other power or high-frequency devices. Before
assembly prove if there is sufficient level of signal required by GSM network in selected
place.
