13
Instruction by Phone
SMS Instruction
Pre-set
1901m#
SIMDIR1 m
0, tm. both SIM cards
1902m#
SIMDIR2 m
0, tm. both SIM cards
1903m#
SIMDIR3 m
0, tm. both SIM cards
1904m#
SIMDIR4 m
0, tm. both SIM cards
1905m#
SIMDIR5 m
0, tm. both SIM cards
1906m#
SIMDIR6 m
0, tm. both SIM cards
1907m#
SIMDIR7 m
0, tm. both SIM cards
1908m#
SIMDIR8 m
0, tm. both SIM cards
1909m#
SIMDIR9 m
0, tm. both SIM cards
1910m#
SIMDIR10 m
0, tm. both SIM cards
1911m#
SIMDIR11 m
0, tm. both SIM cards
1912m#
SIMDIR12 m
0, tm. both SIM cards
1913m#
SIMDIR13 m
0, tm. both SIM cards
1914m#
SIMDIR14 m
0, tm. both SIM cards
1915m#
SIMDIR15 m
0, tm. both SIM cards
1916m#
SIMDIR16 m
0, tm. both SIM cards
Where
m
is 0, 1 or 2 -
0
= both SIM cards,
1
= only SIM1,
2
= only SIM2
ATTENTION!
Switch-over to other SIM card lasts approx. 25s therefore it is not recommended to use this
function in applications with high density of phone service.
So as pre-selections are correctly evaluated numbers of pre-selections must be set from
longest to shortest. Priority of evaluation goes from above.
5.21. Number for Information SMS Messages.
GB 200 allows automatic dispatch of information about changes in configuration, operation
time and about RESET. Information is sent as SMS message to set cell phone number if
this number is entered in following way:
Instruction by Phone
SMS Instruction
Pre-set
2000n#...
INFOSMS
n ...
Not activated in production
Where
n
is 1 to 15 figures of cell phone number
Removal of values is carried out by instruction 2000# or by SMS message INFOSMS
.
(point represents data)
5.22. Set-up of Number for Monthly Upkeep Calling.
Not to forfeit credit of GO card, EUROTEL requires to carry out at least one paid phone
connection in 3 months from this card. So that user, which uses GB 200 for protection of
properties, does not have to think of this matter it is possible to enter number, which gate
automatically calls each month of operation, in GB 200.
Instruction by Phone
SMS Instruction
Pre-set
2100n#...
MCALL a ...
Not activated in production
Where
n
is 1 to 5 figures of number
Removal of values is carried out by instruction 2100# or by SMS message MCALL
.
(point
represents data)
