1
2
3
If plugging into a wall outlet:
1. Plug one end of the provided power adapter into a wall outlet (both camera and monitor power
adapters are interchangeable).
2. Connect the other end of the power adapter into the power input on the camera. This is located under
the ON/OFF switch.
3. Turn the ON/OFF switch to the ON position. The LED on the camera should now light up red.
Mounting the Camera
Option 1: Using the Magnetic Base (for flat surfaces outside
of your baby’s crib)
The camera has an innovative and convenient magnetic base that
magnetically holds the camera securely. This allows you to freely
rotate the camera left, right, up and down with ease:
1. Place the camera & magnetic base on a flat surface.
2. Rotate the camera freely and aim it in the direction you would
like to monitor. Avoid placing at an angle over 30 degrees as
the camera may fall out. The magnetic strength is lower over
the battery compartment.
3
CAMERA SETUP
BABYVIEW_Manual.indd 8
31/08/2009 1:18:15 PM
