SYNCING CAMERA AND MONITOR
The Monitor is capable of going approximately 450 feet (150 meters)
away from the camera and still be within range to communicate,
hear and view the camera. This will depend on environmental
factors that may increase or decrease the maximum wireless range.
The link LED will be green when the monitor and camera are paired
and red when they are not paired.
• If the signal is lost between the monitor and the Camera the
message “OUT OF RANGE” will appear on the monitor. This
could be caused by the camera having no power or the distance
between the camera and monitor being too far. Try moving the
camera and monitor closer together, if this does not fix the issue,
try syncing the monitor and camera. Syncing the monitor and
camera may also improve the audio quality.
• To sync the monitor and camera:
1. With both units powered on, press the VOX button on the
monitor and the night light button on the camera at the
same time. Hold both buttons down for approximately
5 seconds.
2. The words “Signal Searching will appear on the monitor”.
3. Once the night lights (stars) on the camera blink three
times the camera and monitor will been synced and you can
properly view your camera on your handheld monitor.
9
SIGNAL SEARCHING
RANGE
BABYVIEW_Manual.indd 14
31/08/2009 1:18:18 PM
