Leuze electronic GmbH + Co. KG
In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0
[email protected] • www.leuze.com
Connecting the IT 3820 to the USB interface (keyboard emulation)
The operation of the IT 3820 in keyboard-emulation mode on a USB port is described in this section. A PC keyboard is emulated
in this operating mode. The data which are read in are written directly to the currently activated program. Thus, the data can be
processed further in all standard programs.
required parts:
1x
501 06 242
IT 3820 SR 0C0BE
1x
501 03 990
Base station ST 2020
1x
501 03 989
Power supply unit ST 2020
1x
501 03 404
USB cable
Procedure:
1.
Connect the cable for the ST 2020 base station to a free
USB port.
2.
The scanner acknowledges this connection with a beep.
3.
Scan the barcodes shown below.
USB keyboard emulation with CR LF
Keyboard layout for Germany/Austria
Notice!
To charge the IT 3820, the power supply unit must be plugged in and the hand-held scanner placed in the ST 2020
base station.
IT 3820/3820i
Hand-held barcode scanner with Bluetooth data transmission
