IT 1452g - 01
2015/09
Connecting the IT 1452g to the PS/2 interface
The operation of the hand-held scanner in keyboard emulation mode is described in this section. With this operating mode, a PC
keyboard is emulated. The read data are written directly into the currently activated program. The data can thereby be further
processed in all standard programs.
Required parts:
1x
IT 1452g 1D-2
1x
50130499
Base for IT 1452 base sta-
tion
1x
50114525
Power supply unit
1x
50114519 KB
PS2-1
IT 1902
Procedure:
1.
Switch off the PC.
2.
Disconnect the keyboard.
3.
Connect the cable for the base station
between the keyboard and the PC.
4.
Switch the PC back on.
5.
Scan the 2D code shown below.
6.
Return the hand-held scanner to the base sta-
tion to apply the settings. This procedure is
concluded with acoustic confirmation signals.
Notice!
To charge the hand-held scanner, the
power supply unit must be plugged in
and the hand-held scanner placed in
the base station.
Disconnect
IT 1452g
