IT 1452g - 01
2015/09
Connecting the IT 1452g to the MA 2xx
i
Required parts:
1x
IT 1452g 1D-2
1x
50130499
Base for IT 1452 base station
1x
50115105
RS 232 cable
1x
50114525
Power supply unit
1x
50113397
KB JST-HS-300
1x Connection unit
MA 2xx
i
for the respective fieldbus system:
50112893
MA 204
i
for PROFIBUS or
50112892
MA 208
i
for Ethernet or
50112891
MA 248
i
for PROFINET
Procedure:
1.
Insert the KB JST-HS-300 cable into the MA 2xx
i
.
2.
Connect the interface cable to cable KB JST-HS-300.
Connect the interface cable and the power supply unit to the base station (see "Con-
necting the IT 1452g to the serial PC interface").
3.
Scan the adjacent 2D code.
The hand-held scanner is set to the following transmission parameters:
RS 232 transmission with 9600 baud, 8 data bits, 1 stop bit, no parity, postfixes
<CR><LF>.
4.
Return the hand-held scanner to the base station to apply the settings. This procedure
is concluded with audible confirmation signals.
IT 1452g
