Leuze GSX14E, Руководство пользователя

Страница: 7 / 19

Intended use
The ultrasonic label forks are ultrasonic sensors for contactless detection of the
gap between two consecutive labels on a carrier tape.
NOTICE
Observe intended use!
This product is not a safety sensor and is not intended as personnel
protection.
Ä
Only allow competent persons to put the product into operation.
Ä
Only use the product in accordance with its intended use.
Function and device operation
The label material used determines the achievable precision and the reliability of
gap detection between labels.
– Light switching: signal in the label gap.
– Dark switching: signal on the label.
Overview of the operating structure via teach and label buttons
Function Configuration via buttons
Standard function Normal operation after switch-on
easy Teach
(2-point calibration on carrier and label) Press the teach (+) button: 2 … 7 s
Static teach
(1-point calibration on carrier) Press the teach (+) button: 7 … 12 s
Set switching behavior
(light/dark switching) Press the teach (+) button: >12 s
easyTune function – Manual fine tuning
of the switching threshold
Increase sensitivity
Reduce sensitivity
Press the teach (+) button: <2 s
Press the label (-) button: <2 s
Select active detection process Press the label (-) button: 2 … 7 s
Deactivate/activate the
ALC (Auto Level
Control) function
(automatic optimization of the switching
threshold)
Press the label (-) button: 7 … 12 s
Set the easy Teach mode Press the label (-) button: >12 s
Manual locking/unlocking of the buttons
on the device Simultaneously press the teach button
(+) and the label button (-): > 7 s
7
EN