IT 1911i / IT 1981i - 03
2015/09
Connecting the IT 1911i / IT 1981i to the USB interface (COM port emulation)
The operation of the hand-held scanner as a serial interface on a USB port is described in this chapter. With this operating mode,
a COM interface is emulated. The read data are sent to a new COM interface. The drivers with which this COM interface is emu-
lated can be downloaded from our homepage at
www.leuze.com
. Thus, the data can be processed further in programs which
expect data via COM interfaces.
Required parts:
1x
IT 1911i ER-3 or IT 1981i FR-3
1x
50122431
Base for IT 19x1i
1x
50123862
Power supply unit for Base for
IT 19x1i
1x
50114521
KB USB-1 IT190x (3m, straight)
or
1x
50114523
KB USB-2 IT190x (5m, spiral)
Procedure:
1.
Install the USB serial driver
(current version available at
www.leuze.com
).
2.
Connect the cable for the base station to a free USB
port.
3.
The scanner acknowledges this connection with a beep.
4.
Scan the adjacent 2D code.
5.
Open a terminal program or your program for the serial
interface, select the new COM port, and make the fol-
lowing settings: baud rate 115,200, 8 data bits, 1 stop
bit, no parity, postfix <CR>.
6.
Return the hand-held scanner to the base station to
apply the settings. This procedure is concluded with
audible confirmation signals.
Notice!
To charge the hand-held scanner, the power supply unit must be plugged in
and the hand-held scanner placed in the base station.
IT 1911i / IT 1981i
