IT 1911i / IT 1981i - 03
2015/09
Connecting the IT 1911i / IT 1981i to the PS/2 interface
The operation of the hand-held scanner in keyboard emulation mode is described in this section. With this operating mode, a PC
keyboard is emulated. The read data are written directly into the currently activated program. The data can thereby be further
processed in all standard programs.
Required parts:
1x
IT 1911i ER-3 or IT 1981i FR-3
1x
50122431
Base for IT 19x1i
1x
50123862
Power supply unit for Base for
IT 19x1i
1x
50114519 KB
PS2-1
IT 19xx
Procedure:
1.
Switch off the PC.
2.
Disconnect the keyboard.
3.
Connect the cable for the base station between the
keyboard and the PC.
4.
Switch the PC back on.
5.
Scan the 2D code shown below.
6.
Return the hand-held scanner to the base station
to apply the settings. This procedure is concluded
with audible confirmation signals.
Notice!
To charge the hand-held scanner, the power supply unit must be plugged in
and the hand-held scanner placed in the base station.
Disconnect
IT 1911i / IT 1981i
