Leuze electronic BCL 608i Скачать руководство пользователя

Страница: 27 / 92

Electrical connection

Leuze electronic

BCL 608i

Electrical connection

7.1

Overview

The device is equipped with four M12 plugs/sockets which are A- and D-coded, and a USB socket of type

A.
The voltage supply (PWR) as well as the four freely configurable switching inputs/outputs (SW IN/OUT and

PWR) are connected there.
HOST / BUS IN is available as a PROFINET

IO interface for connecting to the host system.

By means of the implemented switch function in the device, an additional second BUS OUT PROFINET

interface is available for creating a scanner network (linear topology).
An USB connection is used as a SERVICE interface.

Service, USB socket, type A

SW In/Out, M12 socket (A-coded)

Bus Out, M12 socket (D-coded)

Host/Bus In, M12 socket (D-coded)

PWR, M12 plug (A-coded)

Figure 7.1: Connections of the device
Voltage supply and switching inputs/outputs
The voltage supply (10 … 30 V DC) is connected at the PWR M12 plug.

CAUTION



Do not open the device yourself under any circumstances! There is otherwise a risk of uncontrolled

emission of laser radiation from the device. The housing of the device contains no parts that need to

be adjusted or maintained by the user.



Before connecting the device, be sure that the supply voltage agrees with the value printed on the

name plate.



Connection of the device and cleaning must only be carried out by a qualified electrician.



Ensure that the functional earth (FE) is connected correctly. Unimpaired operation is only guaranteed

when the functional earth is connected properly.



If faults cannot be corrected, the device should be removed from operation and protected against pos

sible commissioning.

CAUTION

For UL applications, use is only permitted in Class 2 circuits in accordance with the NEC (National Elec

tric Code). The bar code readers are designed in accordance with safety class III for supply by PELV

(protective extra-low voltage with reliable disconnection).

CAUTION

Degree of protection IP 65 is achieved only if the connectors and caps are screwed into place!

Содержание BCL 608i





























































































Результаты поиска

Содержание BCL 608i

Отзывы:

Похожие инструкции для BCL 608i

Бренды по названию

Популярные бренды

Leuze electronic BCL 608i, Руководство по эксплуатации

Результаты поиска

Содержание BCL 608i

Отзывы:

Похожие инструкции для BCL 608i

Бренды по названию

Популярные бренды