Leuze electronic
CMS 700i
– Contour Measurement System
Page 30
For each light curtain, the transmitter unit must be connected to the respective receiver unit at
connection X2 with the cable KB DN/CAN-5000 SBA (article no. 50114698).
Each light curtain receiver must be connected to connection X1 with the cable KDS S-M12-8A-M12-
8A-P1-050 (article no. 50135146) at connection X1 according to its measured variable length, width or
height on the bottom side of the control cabinet LSC-Box, see Figure 20.
6.4 Connection rotary encoder
If the system has a rotary encoder for length measurement, connect it as follows.
The cable KDS S-M12-8A-M12-8A-P1-050 (article no. 50135146) must be connected with the socket
to the encoder, observe the anti-twist protection!
The cable KDS S-M12-8A-M12-8A-P1-050 (part no. 50135146) must be connected with the plug to the
control cabinet LSC-Box XS1400, see Figure 20!
Figure 22: Pin configuration rotary encoder
