05
Get your next module level ready and feed the longer,
non-connected Glow Ring cable up and through the
center hole before you attach the second module to
the first Glow Ring.
Hint:
It’s easier to feed the cable
through the module center before locking the module
in place.
Repeat step 3 & 4 for each dual-cabled Glow Ring and
module, and save the top single-cabled Glow Ring
for last. The short connector cords should always
connect to the lower ring, and the longer connector
cords should always thread up to the ring above.
Attach the single-cabled Glow Ring to the top module
and connect the long cable from the ring below to
the single cable connection. There should not be an
unconnected cable once all Glow Rings are installed.
Any unconnected cables will cause damage to the
device.
4
Power Supply
Dual-Cabeled
Glow Ring
Top Single-Cabled
Glow Ring
5
Power Supply
6
